DescriptionRefrigerator Door Push Button Switch for Kenmore LG 6600JB1010AThe Kenmore LG 6600JB1010A refrigerator door push button switch is a common component used in refrigerators to control the dispenser functions, such as water and ice. Below are specifics, troubleshooting tips, and installation instructions for this part.SpecificationsPart Number: 6600JB1010ACompatibility: Designed for Kenmore refrigerators with a push-button dispenser (often used in LG-manufactured Kenmore models).Function: Activates the water and ice dispenser when pressed.Appearance: Typically a small, rectangular switch with a button and wiring harness.Location: Located behind the dispenser panel on the refrigerator door.TroubleshootingIf the dispenser is not working, the push button switch may be faulty. Here’s how to diagnose the issue:Check Power Supply:Ensure the refrigerator is plugged in and receiving power.Verify the circuit breaker or fuse is not tripped.Test the Dispenser:Press the button to see if the dispenser activates.If nothing happens, the switch may be faulty.Inspect the Switch:Remove the dispenser panel to access the switch.Check for visible damage, such as cracks or loose wires.Test with a Multimeter:Disconnect the switch and use a multimeter to test for continuity.If there’s no continuity when the button is pressed, the switch is defective.Check Other Components:If the switch is functional, the issue could be with the dispenser control board, wiring, or water inlet valve.Installation InstructionsReplacing the push button switch is a straightforward process. Follow these steps:Tools Needed:Phillips screwdriverFlathead screwdriverMultimeter (optional, for testing)Steps:Unplug the Refrigerator:Disconnect the refrigerator from the power source to ensure safety.Remove the Dispenser Panel:Locate the screws or clips holding the dispenser panel in place.Use a screwdriver to remove the screws or gently pry off the panel.Disconnect the Old Switch:Locate the push button switch behind the panel.Disconnect the wiring harness connected to the switch.Remove the Old Switch:Unscrew or unclip the old switch from the panel.Install the New Switch:Position the new switch (6600JB1010A) in place.Secure it with screws or clips.Reconnect the Wiring:Attach the wiring harness to the new switch.Reattach the Dispenser Panel:Place the panel back onto the refrigerator door.Secure it with screws or clips.Test the Dispenser:Plug the refrigerator back in and test the dispenser to ensure the new switch is working.Additional TipsOrdering the Part: Ensure you purchase the correct part number (6600JB1010A) from a reputable supplier or directly from Kenmore/LG.Handle with Care: Be gentle when removing the dispenser panel to avoid damaging it or other components.Consult the Manual: Refer to your refrigerator’s user manual for model-specific instructions.If you’re unsure about performing the repair yourself, consider contacting a professional technician for assistance.
